In this post, I will show you exactly how to run discourse behind a nginx reverse proxy. While still using the supported installation methods. Requirements: Valid domain name. Valid ssl certificate. Valid DNS entries pointing to the domain name. Valid working email server or smtp provider. Working Nginx Reverse Proxy and ability to reach the instance and create the SSL cert for later use. VM or LxC container that can run docker. For this guide I will be using my own instance as an example, with all features working, backups, upgrading etc. Tested for around 2 weeks. My Discourse VM Specs: CPU: 4 Cores Ram: 6GB Swap: 8GB (SSD swapfile) Storage: 50GB (SSD) OS: Ubuntu 22.04.3 You can use the minimum but when testing. Discourse basically abuses 2GB easily. Inactive usage is about 1.48GB of 6GB. NOTE: This install uses the reverse proxy to create the ssl certificates. certbot can be used if preferred. STEP 1: Download the latest ubuntu server from Get Ubuntu Server | Download | Ubuntu STEP. 2: Install Ubuntu sever on the VM/LxC template 1.1 Make sure ubuntu is up-to-date with all server packages. Use the following commands to install all required packages: apt update -y && apt upgrade -y && apt wget curl zip git docker.io nginx -y && reboot STEP 3: Installing Discourse. Following the Beginner Guide discourse/docs/INSTALL-cloud.md at main · discourse/discourse · GitHub ssh into your server and simply enter the following: sudo -s git clone https://github.com/discourse/discourse_docker.git /var/discourse cd /var/discourse chmod 700 containers After completing the above. You can then run the ./discourse-setup Follow all the steps and enter them correctly, As this would be vital for a successful install. The steps would ask the following; example from the setup guide: [discourse-setup] Let the install run it may take a while depending on your internet connection and sever specs. It took around 5-8 minutes to fully complete the install using my VM setup. STEP 4: Once the installation has completed you will then see the start command that the docker container is using and the generated container ID (hash). NOTE: Since you are behind a proxy via the WAN it would show you a 502 error and since the container is using dockers network. It will be unreachable by the WAN or LAN, unless you connect to the 172.17.0.1/16 network, which we will not be needing. Double check that the installation has completed and the docker container is running using: docker ps You should get the following output. CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES XXXXXX local_discourse/app "/sbin/boot" 6 days ago Up 7 hours app STEP 5: Updating the app.yml file to fit the reverse proxy configuration. Using your preferred text editor open /var/discourse/container/app.yml Replace/Comment out the following lines: (this will be handled by the local Nginx) #- "templates/web.ssl.template.yml" #- "templates/web.letsencrypt.ssl.template.yml" Immediately after the #- "templates/web.letsencrypt.ssl.template.yml" add the following: - "templates/web.socketed.template.yml" Then comment out the expose section as discourse will now be using a websocket, finally nginx would be able to start as it would free up the required 80 & 443 ports locally. #expose: # - "80:80" # http # - "443:443" # https Now to force Discourse to only supply links with HTTPS add the following in the env section: # FORCE SSL DISCOURSE_FORCE_HTTPS: true Now to finally get things going you will need to rebuild the app. Using the following: cd /var/discourse ./launcher rebuild app Let that run and complete. To check if it was successful make sure the docker run command is showing or simply run docker ps and you will see the container running. STEP 6: Enabling Nginx and configuring the default site to point to the docker container. Allowing the Reverse proxy to the access the container using the local nginx. Run the following: systemctl enable nginx && systemctl start nginx To check if it is running. Try to access the default landing page for nginx using your browser and local ip. EG: http://10.10.0.4 You should get a congratulations page from Nginx. STEP 7: Updating the default config to the following: First empty out the config file: echo "" > /etc/nginx/sites-available/default Using your text editor open the config file and add the following: NOTE: Update server_name with your domain and ssl_certificate, ssl_certificate_key with your SSL certificate and keyfile location. Certbot can be used but i simply rsync my cert and key from my reverse proxy. server { listen 80; listen [::]:80; server_name add.yourdomain.com; server_tokens off; return 301 https://$host$request_uri; } # Default server configuration # server { # SSL configuration # server_tokens off; listen 443 ssl default_server; listen [::]:443 ssl default_server; server_name add.yourdomain.com; ssl_certificate /etc/ssl/certs/your_ssl_cert.bundle; ssl_certificate_key /etc/ssl/private/your_ssl_cert.key; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA'; ssl_prefer_server_ciphers on; location / { proxy_pass http://unix:/var/discourse/shared/standalone/nginx.http.sock; proxy_set_header Host $http_host; proxy_http_version 1.1; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header X-Real-IP $remote_addr; } } Save the new default file and run systemctl restart nginx. STEP 8: Open up your browser and goto your forum domain https://somedomain.com and you will be greeted with the following page. [תמונה] That’s it, all done. You can then follow the steps to register and get you forum/community going :). ADDITIONAL STEP: Post-Install Maintenance We strongly suggest you turn on automatic security updates for your OS. In Ubuntu use the dpkg-reconfigure -plow unattended-upgrades For support you can simply use this community, for the local Nginx you can feel free to ask for assistance on this post.

This is great. Thank you. One thing I would like to see as an improvement to this guide is being able to serve static assets via nginx. Currently, all the static requests are going to the worker in the above configuration. I am still trying to figure out how to work-around this, will post an update if i figure it out.

[תמונה] Anil Shanbhag: One thing I would like to see as an improvement to this guide is being able to serve static assets via nginx. Can you expand on what static files ? Are you perhaps talking about the 404, 302,500 static pages from nginx or static pages from Discourse? I looked into it for a bit and found that the redirect for the 404 pages work. The only page i cannot seem to set it the 500 error page. Can you be a little bit more specific so that i know exactly what i am looking into. :slight_smile:

This guide is excellent. I was able to follow the whole thing until I got to loading the web site. I get a “too many redirects” error. When I use the IP, Discourse loads fine, but I can’t get through the redirects issue. So close. Any help would be appreciated. Thanks.

Anyone know how I can resolve this issue? The site works, but I notice these errors in the container nginx error.log. I have been using a reverse proxy set up according to these instructions above. Lookin at /etc/nginx/conf.d/discourse.conf in the container, I see upstream discourse { server 127.0.0.1:3000; } Should that be somethig like?: upstream discourse { http://unix:/var/discourse/shared/standalone/nginx.http.sock; } Looking in /var/log/nginx in the container, I see errors like: 2025/02/09 21:00:21 [error] 69#69: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xx.xxx.xxx, server: _, request: "POST /message-bus/b39980c2387e4750bc1e320cb6195424/poll?dlp=t HTTP/1.1", upstream: "http://127.0.0.1:3000/message-bus/b39980c2387e4750bc1e320cb6195424/poll?dlp=t", host: "discourse.xxxx.com" 2025/02/09 21:00:23 [error] 67#67: *3 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xx.xx.xxx, server: _, request: "GET /chat/api/me/channels HTTP/1.1", upstream: "http://127.0.0.1:3000/chat/api/me/channels", host: "discourse.xxxx.com" 2025/02/09 21:00:23 [error] 70#70: *5 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xx.xx.xxx, server: _, request: "POST /message-bus/d95b6999d26242f28f4875732b195440/poll HTTP/1.1", upstream: "http://127.0.0.1:3000/message-bus/d95b6999d26242f28f4875732b195440/poll", host: "discourse.xxxx.com" Thank you!

Yes, I am using a socket on the local reverse proxy outside of the container, and check, I followed Step 5 in app.yml. /var/discourse/containers# grep web.socketed.template.yml app.yml - "templates/web.socketed.template.yml" /var/discourse/containers# grep templates/web.ssl.template.yml app.yml # - "templates/web.ssl.template.yml" /var/discourse/containers# grep templates/web.letsencrypt.ssl.template.yml app.yml # - "templates/web.letsencrypt.ssl.template.yml" /var/discourse/containers# grep http app.yml # - "80:80" # http # - "443:443" # https /var/discourse/containers# grep DISCOURSE_FORCE_HTTPS app.yml DISCOURSE_FORCE_HTTPS: true templates: - "templates/postgres.template.yml" - "templates/redis.template.yml" - "templates/web.template.yml" ## Uncomment the next line to enable the IPv6 listener #- "templates/web.ipv6.template.yml" - "templates/web.ratelimited.template.yml" ## Uncomment these two lines if you wish to add Lets Encrypt (https) # - "templates/web.ssl.template.yml" # - "templates/web.letsencrypt.ssl.template.yml" - "templates/web.socketed.template.yml" ## which TCP/IP ports should this container expose? ## If you want Discourse to share a port with another webserver like Apache or nginx, ## see https://meta.discourse.org/t/17247 for details #expose: # - "80:80" # http # - "443:443" # https I reviewed this: Discourse working with jwilder /nginx proxy & acme-companion but I can’t really make any sense of it in terms of my issue…

Hey there, May 2026 update for anyone who find this: I use NPM Plus. I followed the instructions here, but wanted to add if anyone else is using NPM Plus: Instead of using the manual Nginx config listed here, OR a custom location, OR advanced settings; you can just use the provided Unix URL without the trailing semicolon, and leave the port empty. Also leave custom locations and advanced setting completely empty. See image below for an example [image] I have not tried this on regular NPM, but it may or may not work with the regular/standard NPM as well. Thanks!

התקנת Discourse מאחורי Reverse Proxy בשימוש בהתקנה המומלצת (נתמכת)

תמיכה התקנה

Arkshine 10 בפברואר,‏ 2025,‏ 1:46pm 6

Did you follow step 5 properly? It seems you are not using a socket.

נושא		תגובות	צפיות
Fresh install returning 502 Bad Gateway Self-hosting unsupported-install	27	1375	12 במרץ,‏ 2024
Run other websites on the same machine as Discourse Self-Hosting how-to , advanced-setup	66	141186	30 ביוני,‏ 2026
Using a certificate when Discourse is installed behind a reverse proxy Self-hosting unsupported-install	24	5407	17 במאי,‏ 2019
Apache w/ SSL + Discourse: Next steps? Self-hosting	10	1996	18 ביולי,‏ 2020
I want to install using a reverse proxy for Apache Self-hosting	13	4968	8 באוגוסט,‏ 2021

התקנת Discourse מאחורי Reverse Proxy בשימוש בהתקנה המומלצת (נתמכת)

נושאים קשורים