After discovering the release of 3.3.0-beta1, I immediately updated my Discourse instance from the web interface. However, during the update process, the web interface logs stalled for more than fifteen minutes without further output (I recall the last output being a series of growing ellipses? It might have been, I’m a bit uncertain). About 2 hours later, I checked the server status from the cloud platform and suspected it had frozen, so I performed a soft reboot from the cloud platform. After the reboot, I promptly ran a Discourse backup from the command line, downloaded the backup and app.yml locally, and then completely reinstalled Discourse (of course, the latest version). Afterwards, I uploaded the backup and initiated the restore process from the command line. The restore was successful, but now my Discourse is facing severe performance issues. Previously, CPU usage during normal usage did not exceed 10%, but now it spikes up to around 30% even during off-peak hours, and disk reads are also relatively high. What’s worse, sometimes the server inexplicably crashes, with disk reads reaching around 1900 per second (this is the limit of my cloud server), and the CPU being over 40% in a wait state. Webpages fail to load, showing connection timeouts. At the moment, I’m running vmstat and top, but unfortunately, I didn’t keep the output. I recall that swap IO was almost zero, indicating purely disk reads. The number of blocked threads exceeded 100. I suspect that this failed update may have caused some damage, possibly to data within the backup, rather than the software itself. Is there any way to—uh, I’m not sure?—refresh or delete some cache or similar operations? Or perhaps… run the update again? (After all, Discourse updates are quite frequent, and it can be updated almost anytime.) As a temporary workaround, I installed a software watchdog to automatically reboot during high loads. However, this is ultimately not a long-term solution, and I haven’t found similar issues here; evidently, it’s not a problem with the Discourse software itself. I’m wondering how to address this. If you need me to execute some commands on the server to check its status during high loads, feel free to ask. I’ll do my best to maintain my SSH connection and obtain this data without rebooting.

Thanks, that’s great. Somehow you have swappiness set to zero , which is almost certainly most of your problem. But there are three settings worth getting right: one is swappiness and two of them are mentioned in MKJ’s Opinionated Discourse Deployment Configuration /proc/sys/vm/overcommit_memory /sys/kernel/mm/transparent_hugepage/enabled /proc/sys/vm/swappiness You can set these once, but you should also ensure they are set at boot time - see MJK’s post, and check those files before you overwrite them. I suspect something is happening at boot time to set the swappiness to zero. Possibly your hosting provider is trying to discourage swapping to SSD. But you must have swap, or else you must upgrade to 4G RAM at least. Perhaps try egrep -r swappiness /etc/ to try to find where it is being set. There is advice elsewhere on this forum to set swappiness to 10 - I prefer to leave it at the default of 60. [תמונה]Create a swapfile for your Linux server Set the swappiness to 10 so its only uses as an emergency buffer

What does your sidekiq queue look like? It could just be rebaking all posts and load calm down eventually once the backlog has been got through. Ie the situation should be transitory. [תמונה] tumbleweed: during the update process, the web interface logs stalled for more than fifteen minutes without further output This has happened to me a few times recently. Every time I’ve manually rebooted then performed a command line rebuild. Obviously not a good solution long term and risky. This is a sign your machine no longer has enough memory. Consider increasing swap to cope with the spikes. I’m finding I need a 4GB machine plus 3GB swap now to execute online updates: how much memory do you have?

Uh… actually, he wasn’t experiencing extremely high loads shortly after the restore, which I suppose is normal. But in my case, after the load had dropped to around 2% following the restore, when I was making some edits on the web interface, suddenly the page stopped loading after one action. Upon checking the cloud server platform, CPU and disk reads were very high. I don’t think this is a problem with rebaking all posts. Since my server is currently in a normal state, here is the Sidekiq interface: [image] [image]

[תמונה] Robert: how much memory do you have? I have 2GB of physical memory and 2GB of swap. It seems like swap was automatically enabled during the Discourse installation process? Anyway, I haven’t manually configured it. I manually add swap to 6 GB in total now.

Ok that’s your issue. From my recent experience looks like web compilation process is much more greedy and you could experiment with much bigger swap or migrate to a bigger server.

btw, in my previous attempts to perform backups through the web interface, the logs would sometimes get stuck. Now, I execute all backups and restores from the command line (except for automatic backups, which have never failed and are working fine). I’m curious if this is a common issue? Is there a command to perform update? Should I continue performing updates through the command line in the future? Would this potentially increase the success rate?

In daily usage, I also notice a significant increase in webpage loading delays compared to before, and it’s highly likely not a network issue but a performance problem. Here are the performance data when loading the homepage: [image]

The server freezed again. (watchdog is stopped manually to get full log without reboot) Here’s the top and vmstat output: Note that the top output here hasn’t updated much since the server freeze, unlike vmstat, so it may not reflect the latest data. top - 21:53:16 up 2:19, 3 users, load average: 19.20, 4.89, 1.90 Tasks: 164 total, 1 running, 163 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.7 us, 7.2 sy, 0.0 ni, 0.0 id, 91.8 wa, 0.0 hi, 0.4 si, 0.0 st MiB Mem : 1668.6 total, 75.9 free, 1473.1 used, 119.6 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 36.8 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 92 root 20 0 0 0 0 S 2.8 0.0 0:08.01 kswapd0 2504 root 10 -10 123496 6932 0 D 1.6 0.4 2:59.44 AliYunDunMonito 90 root 0 -20 0 0 0 I 1.0 0.0 0:01.10 kworker/1:1H-kblockd 1320 root 20 0 1236124 2116 0 S 0.8 0.1 0:00.96 containerd-shim 2493 root 10 -10 87652 1744 0 S 0.6 0.1 0:44.69 AliYunDun 1008 root 20 0 1276372 2160 0 S 0.5 0.1 0:43.62 argusagent 725 root 20 0 689584 3860 0 S 0.3 0.2 0:08.16 aliyun-service 1964 message+ 20 0 74800 12512 0 D 0.3 0.7 0:19.97 redis-server 1973 www-data 20 0 56840 4872 472 D 0.3 0.3 0:01.36 nginx 2081 admin 20 0 519788 263284 4 S 0.3 15.4 0:07.88 ruby 2214 admin 25 5 5338856 495356 0 S 0.3 29.0 0:31.95 ruby 2227 admin 20 0 5246956 484488 4 S 0.3 28.4 0:33.31 ruby 2467 systemd+ 20 0 215196 15052 11348 D 0.3 0.9 0:00.45 postmaster 785 root 20 0 42256 748 0 S 0.2 0.0 0:07.58 AliYunDunUpdate 805 root 20 0 1798676 11832 0 S 0.2 0.7 0:02.24 containerd 1027 root 20 0 2281464 29296 0 S 0.2 1.7 0:01.96 dockerd 2056 systemd+ 20 0 67872 2192 0 D 0.2 0.1 0:00.39 postmaster 2243 root 20 0 17204 5068 2592 S 0.2 0.3 0:00.34 sshd 2555 root 20 0 10496 2736 1916 R 0.2 0.2 0:11.41 top 9998 admin 20 0 5057740 313028 4 S 0.2 18.3 0:04.83 ruby 11658 admin 20 0 10944 252 0 D 0.2 0.0 0:00.09 sleep 1 root 20 0 166776 6568 2808 D 0.1 0.4 0:01.42 systemd 22 root 20 0 0 0 0 S 0.1 0.0 0:00.31 ksoftirqd/1 149 root 0 -20 0 0 0 I 0.1 0.0 0:00.17 kworker/0:1H-kblockd 707 systemd+ 20 0 16260 2296 1212 D 0.1 0.1 0:00.16 systemd-network 723 root 20 0 19424 984 0 S 0.1 0.1 0:01.58 assist_daemon 1965 root 20 0 6680 280 0 D 0.1 0.0 0:00.05 cron 1974 www-data 20 0 55912 3996 472 D 0.1 0.2 0:00.98 nginx 2054 systemd+ 20 0 213244 6344 4384 S 0.1 0.4 0:02.02 postmaster 2055 systemd+ 20 0 213780 3208 924 D 0.1 0.2 0:00.12 postmaster 2270 root 20 0 17204 3880 1404 D 0.1 0.2 0:00.67 sshd procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 71456 624 134980 0 0 11302 4 2209 3766 1 1 96 2 0 0 1 0 72756 1452 132412 0 0 15250 12 2418 3969 1 2 94 4 0 0 0 0 67724 1244 137444 0 0 4485 2 2083 3700 1 1 98 1 0 0 0 0 80388 928 124660 0 0 26388 10 2650 4018 1 2 92 4 0 0 0 0 78256 696 126228 0 0 14752 6 2286 3792 1 1 95 3 0 0 0 0 72252 1680 130784 0 0 40334 41 2938 4212 1 2 89 7 0 0 0 0 74812 712 128588 0 0 15904 34 2309 3839 1 1 95 3 0 2 0 0 71120 856 132224 0 0 54282 5 3292 4382 1 3 85 10 0 0 0 0 73668 600 128232 0 0 30135 35 2795 4212 1 2 92 5 0 0 0 0 65160 1524 135636 0 0 30239 6 2842 4247 1 2 90 7 0 0 0 0 74480 1416 126484 0 0 11761 8 2254 3793 1 2 95 2 0 1 0 0 80096 1188 120752 0 0 37110 2 2907 4163 1 4 88 7 0 0 0 0 77880 688 122928 0 0 8439 5 2151 3719 1 1 97 2 0 0 8 0 76744 1256 122536 0 0 110986 14 4410 4860 1 6 34 59 0 0 13 0 71776 244 128496 0 0 126111 21 4386 4699 1 7 0 91 0 1 30 0 71860 356 127916 0 0 125040 21 4634 7331 1 7 0 91 0 3 31 0 77448 204 122688 0 0 125980 10 4167 8370 1 5 0 94 0 3 44 0 68184 168 132192 0 0 150011 0 4296 9015 0 7 0 93 0 1 44 0 74812 216 124700 0 0 204040 0 4949 10108 1 6 0 93 0 6 35 0 66588 244 133160 0 0 131782 2 6238 12786 1 7 0 93 0 1 39 0 68156 556 130996 0 0 144440 11 4608 9622 1 8 0 92 0 0 71 0 72256 212 126520 0 0 169879 12 4780 10242 1 10 0 89 0 0 91 0 66752 112 132476 0 0 542955 18 7422 17564 0 52 0 48 0 6 89 0 70324 172 129516 0 0 404754 21 6033 14379 0 52 0 48 0 3 87 0 60468 156 138060 0 0 499604 1 10640 26065 0 56 0 44 0 5 91 0 63456 152 135588 0 0 725747 11 10827 25806 0 55 0 45 0 4 101 0 69596 168 129132 0 0 558872 8 7755 18745 0 56 0 44 0 6 93 0 66516 156 132772 0 0 394003 3 12549 30622 0 54 0 46 0 4 94 0 62872 152 135976 0 0 656057 0 7790 18800 0 52 0 48 0 2 95 0 57072 156 141552 0 0 347776 0 10390 25943 0 56 0 44 0 4 97 0 66308 164 132964 0 0 641920 0 9963 24307 0 55 0 45 0 13 90 0 75620 152 123836 0 0 658883 0 7870 19260 0 55 0 45 0 2 96 0 66244 152 131496 0 0 764233 0 16078 40498 0 55 0 45 0 1 102 0 60156 224 137440 0 0 542241 0 10243 24560 0 54 0 46 0 13 90 0 62488 164 135548 0 0 671301 0 13771 34230 0 55 0 45 0 procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 3 101 0 61812 100 136048 0 0 548615 0 10328 26305 0 55 0 45 0 2 102 0 61412 92 135928 0 0 1003845 0 17283 42751 0 56 0 44 0 8 98 0 60408 152 136896 0 0 662925 0 11369 29130 0 55 0 45 0 2 104 0 68292 152 129552 0 0 628286 0 13772 34122 0 56 0 44 0 2 99 0 65352 152 132436 0 0 494863 5 8766 21559 0 54 0 46 0 10 94 0 58344 96 138800 0 0 669390 0 9294 22968 0 56 0 44 0 3 95 0 61180 100 135444 0 0 598622 0 13342 32430 0 57 0 43 0 8 96 0 59444 160 137584 0 0 720255 0 10812 25735 0 57 0 43 0 14 89 0 66844 160 130072 0 0 665390 0 17496 43187 0 56 0 44 0 1 98 0 64668 152 132756 0 0 498328 0 7262 18622 0 55 0 45 0 1 98 0 61848 172 135060 0 0 438272 0 7693 19947 0 56 0 44 0 3 102 0 60636 152 136548 0 0 1020531 0 17162 43981 0 55 0 45 0 2 93 0 55096 164 141908 0 0 595678 0 14379 37088 0 55 0 45 0 9 100 0 61704 152 134692 0 0 368380 0 10621 27539 0 55 0 45 0 2 104 0 63784 148 132620 0 0 767905 8 11090 28866 0 56 0 44 0 2 110 0 60124 232 135636 0 0 882479 0 14778 38194 0 55 0 45 0 3 109 0 64632 156 131448 0 0 489138 0 11521 30264 0 56 0 44 0 2 107 0 65852 36 130592 0 0 1214409 0 17572 45932 0 55 0 45 0 2 97 0 60260 96 135668 0 0 559811 0 14592 37198 0 56 0 44 0 1 103 0 56064 104 139668 0 0 514522 0 11059 26834 0 57 0 43 0 7 97 0 62624 160 133492 0 0 646888 4 7819 19552 0 57 0 43 0 8 102 0 65404 152 130172 0 0 526268 0 11623 29396 0 56 0 44 0 I’ll keep the freezing state without rebooting. If you need me to execute some commands on the server to check its status during high loads, feel free to ask. I’ll do my best to maintain my SSH connection and obtain all data without rebooting. other data from cloud server platform: [image] [image]

[תמונה] tumbleweed: AliYunDunMonito This looks suspicious - may or may not be the cause. Something is (probably) doing a huge amount of disk reads. AliYunDun seems to be the cloud provider’s tooling. AliYunDunMonitor is (possibly) stuck in disk wait, is running at elevated priority, has clocked up a lot of CPU time. I see someone somewhere has written a script to kill such processes. The tone is angry. (I cannot say whether or not that script is safe, or a good idea.) But it’s also possible some Discourse process is doing all the disk reads. Perhaps try apt-get install iotop iotop -b -d 15 -P -o and watch it until you get your freeze.

Okay and this is the output of iotop when freeze: Total DISK READ: 7.92 M/s | Total DISK WRITE: 11.70 K/s Current DISK READ: 12.14 M/s | Current DISK WRITE: 17.29 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 1 be/4 root 6.12 K/s 0.00 B/s ?unavailable? init noibrs 300 be/3 root 0.00 B/s 2.93 K/s ?unavailable? [jbd2/vda3-8] 374 be/3 root 10.64 K/s 0.00 B/s ?unavailable? systemd-journald 709 be/4 systemd- 3.99 K/s 0.00 B/s ?unavailable? systemd-resolved 723 be/4 root 51.07 K/s 0.00 B/s ?unavailable? assist_daemon 725 be/4 root 856.83 K/s 272.40 B/s ?unavailable? aliyun-service 770 be/4 root 63.31 K/s 0.00 B/s ?unavailable? python3 -Es /usr/sbin/tuned -l -P 785 be/4 root 12.77 K/s 0.00 B/s ?unavailable? AliYunDunUpdate 805 be/4 root 389.98 K/s 0.00 B/s ?unavailable? containerd 1008 be/4 root 242.60 K/s 544.80 B/s ?unavailable? argusagent 1027 be/4 root 690.31 K/s 0.00 B/s ?unavailable? dockerd -H fd:// --containerd=/run/containerd/containerd.sock 1320 be/4 root 241.01 K/s 0.00 B/s ?unavailable? containerd-shim-runc-v2 -namespace moby -id 6e9880833995c5e2a295ed6571129387036824d304e09f43d5e1333ebd7fdbd5 -address /run/containerd/containerd.sock 1953 be/4 root 1906.79 B/s 0.00 B/s ?unavailable? runsvdir -P /etc/service 1962 be/4 admin 85.12 K/s 0.00 B/s ?unavailable? bash config/unicorn_launcher -E production -c config/unicorn.conf.rb 1964 be/4 messageb 611.83 K/s 0.00 B/s ?unavailable? redis-server *:6379 1973 be/4 www-data 530.17 K/s 272.40 B/s ?unavailable? nginx: worker process 2054 be/4 systemd- 8.78 K/s 7.45 K/s ?unavailable? postgres: 13/main: walwriter 2056 be/4 systemd- 102.42 K/s 0.00 B/s ?unavailable? postgres: 13/main: stats collector 2081 be/4 admin 817.20 B/s 0.00 B/s ?unavailable? unicorn master -E production -c config/unicorn.conf.rb 2493 ?dif root 132.21 K/s 0.00 B/s ?unavailable? AliYunDun 2504 be/2 root 740.32 K/s 0.00 B/s ?unavailable? AliYunDunMonitor 45686 be/4 root 47.62 K/s 0.00 B/s ?unavailable? sshd: root@pts/0 45816 be/4 root 36.98 K/s 0.00 B/s ?unavailable? top 46146 be/4 root 357.52 K/s 0.00 B/s ?unavailable? python3 /usr/sbin/iotop -b -d 15 -P -o 46160 be/4 root 267.34 K/s 0.00 B/s ?unavailable? sshd: root@pts/2 46232 be/4 root 174.24 K/s 0.00 B/s ?unavailable? vmstat 5 51903 be/4 admin 1569.22 K/s 272.40 B/s ?unavailable? unicorn worker[0] -E production -c config/unicorn.conf.rb 51972 be/4 admin 175.84 K/s 0.00 B/s ?unavailable? unicorn worker[1] -E production -c config/unicorn.conf.rb 60365 be/4 root 272.40 B/s 0.00 B/s ?unavailable? [kworker/u4:0-writeback] 63081 be/4 root 272.40 B/s 0.00 B/s ?unavailable? [kworker/u4:4-events_unbound] 63825 be/4 systemd- 673.02 K/s 0.00 B/s ?unavailable? postgres: 13/main: discourse discourse [local] idle 64191 be/4 root 23.14 K/s 0.00 B/s ?unavailable? -bash Actually, I managed to crash the website by rapidly refreshing the homepage several times with the F5 key… So, I think it’s highly likely indeed an issue with Discourse. top output now: top - 13:36:47 up 18:03, 4 users, load average: 86.10, 47.87, 19.63 Tasks: 174 total, 4 running, 170 sleeping, 0 stopped, 0 zombie %Cpu(s): 2.2 us, 21.1 sy, 0.0 ni, 0.0 id, 76.3 wa, 0.0 hi, 0.4 si, 0.0 st MiB Mem : 1668.6 total, 69.6 free, 1413.6 used, 185.4 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 36.9 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 92 root 20 0 0 0 0 S 37.8 0.0 100:17.66 kswapd0 1320 root 20 0 1236124 2320 0 S 4.0 0.1 4:18.47 containerd-shim 1027 root 20 0 2281464 29160 0 S 2.6 1.7 2:25.38 dockerd 805 root 20 0 1798676 11844 0 S 2.5 0.7 2:28.22 containerd 2504 root 10 -10 129972 11660 0 D 2.1 0.7 27:34.39 AliYunDunMonito 90 root 0 -20 0 0 0 R 1.5 0.0 1:58.75 kworker/1:1H-kblockd 2493 root 10 -10 88144 2244 0 D 1.1 0.1 10:49.21 AliYunDun 51989 root 20 0 1318960 8980 0 S 0.8 0.5 0:46.15 snapd 1008 root 20 0 1276372 2584 0 S 0.7 0.2 11:16.56 argusagent 46146 root 20 0 22320 9516 1908 D 0.5 0.6 0:23.57 iotop 46160 root 20 0 17200 4968 2496 D 0.3 0.3 0:03.41 sshd 45686 root 20 0 17200 5188 2716 D 0.3 0.3 0:04.21 sshd 785 root 20 0 42324 876 0 S 0.2 0.1 3:41.24 AliYunDunUpdate 45816 root 20 0 10500 3352 2544 R 0.2 0.2 0:26.01 top 51903 admin 20 0 845708 458296 4 S 0.2 26.8 0:32.36 ruby 53938 admin 25 5 5285240 378040 0 S 0.2 22.1 0:33.50 ruby 723 root 20 0 19424 996 0 S 0.2 0.1 1:57.31 assist_daemon 725 root 20 0 689584 3800 0 S 0.2 0.2 3:06.25 aliyun-service 1964 message+ 20 0 74800 13944 0 D 0.2 0.8 2:51.80 redis-server 1974 www-data 20 0 57696 6136 772 R 0.2 0.4 0:36.37 nginx 1975 www-data 20 0 53508 1520 72 S 0.2 0.1 0:45.76 nginx 2053 systemd+ 20 0 213244 6952 4988 D 0.2 0.4 0:27.47 postmaster 51972 admin 20 0 5139692 329104 4 S 0.2 19.3 0:08.21 ruby 64309 systemd+ 20 0 213244 1956 0 D 0.2 0.1 0:00.15 postmaster 22 root 20 0 0 0 0 S 0.1 0.0 0:09.66 ksoftirqd/1 149 root 0 -20 0 0 0 I 0.1 0.0 0:06.26 kworker/0:1H-kblockd 1973 www-data 20 0 56576 5088 768 D 0.1 0.3 0:35.23 nginx 2052 systemd+ 20 0 213468 34408 32340 D 0.1 2.0 0:30.59 postmaster 2055 systemd+ 20 0 213780 3244 932 D 0.1 0.2 0:29.32 postmaster 2056 systemd+ 20 0 68132 2256 0 D 0.1 0.1 0:15.54 postmaster 2081 admin 20 0 585324 280488 4 S 0.1 16.4 0:57.44 ruby vmstat output below: procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 80348 884 230624 0 0 538 6 1980 3661 1 1 99 0 0 0 0 0 78232 2780 226576 0 0 17644 20 2510 4063 3 1 93 2 0 3 0 0 93580 176 186012 0 0 34986 19 3329 4751 13 4 78 6 0 0 29 0 82988 192 177628 0 0 127805 10 4930 6456 5 7 34 54 0 0 30 0 85520 204 175124 0 0 120935 6 3768 6887 1 5 0 94 0 3 37 0 89408 232 170836 0 0 122472 35 3876 7157 1 7 0 92 0 10 80 0 74004 220 186372 0 0 476674 36 4532 10212 0 35 0 64 0 11 89 0 71564 160 190284 0 0 388222 0 11098 27886 0 53 0 47 0 0 100 0 73508 160 188484 0 0 209539 4 4726 11652 0 32 0 68 0 I’m not an expert in Linux, but isn’t the kswapd0 process responsible for managing memory and swap exchange? Why does it have such high sy CPU usage when swpd, si, and so in vmstat are all 0? I’m completely puzzled.

It’s very suspicious that you have 2G of swap but there’s no swap usage and no swap activity. I would suspect your kernel settings. Here are mine - please show all of yours, please do not cherry-pick! head /proc/sys/vm/* ==> /proc/sys/vm/admin_reserve_kbytes /proc/sys/vm/block_dump /proc/sys/vm/compact_unevictable_allowed /proc/sys/vm/dirty_background_bytes /proc/sys/vm/dirty_background_ratio /proc/sys/vm/dirty_bytes /proc/sys/vm/dirty_expire_centisecs /proc/sys/vm/dirty_ratio /proc/sys/vm/dirty_writeback_centisecs /proc/sys/vm/dirtytime_expire_seconds /proc/sys/vm/drop_caches /proc/sys/vm/extfrag_threshold /proc/sys/vm/hugepages_treat_as_movable /proc/sys/vm/hugetlb_shm_group /proc/sys/vm/laptop_mode /proc/sys/vm/legacy_va_layout /proc/sys/vm/lowmem_reserve_ratio /proc/sys/vm/max_map_count /proc/sys/vm/memory_failure_early_kill /proc/sys/vm/memory_failure_recovery /proc/sys/vm/min_free_kbytes /proc/sys/vm/min_slab_ratio /proc/sys/vm/min_unmapped_ratio /proc/sys/vm/mmap_min_addr /proc/sys/vm/mmap_rnd_bits /proc/sys/vm/mmap_rnd_compat_bits /proc/sys/vm/nr_hugepages /proc/sys/vm/nr_hugepages_mempolicy /proc/sys/vm/nr_overcommit_hugepages /proc/sys/vm/numa_stat /proc/sys/vm/numa_zonelist_order /proc/sys/vm/oom_dump_tasks /proc/sys/vm/oom_kill_allocating_task /proc/sys/vm/overcommit_kbytes /proc/sys/vm/overcommit_memory /proc/sys/vm/overcommit_ratio /proc/sys/vm/page-cluster /proc/sys/vm/panic_on_oom /proc/sys/vm/percpu_pagelist_fraction /proc/sys/vm/stat_interval /proc/sys/vm/stat_refresh /proc/sys/vm/swappiness /proc/sys/vm/user_reserve_kbytes /proc/sys/vm/vfs_cache_pressure /proc/sys/vm/watermark_scale_factor /proc/sys/vm/zone_reclaim_mode <== 0 Edit: please also run these and post the output swapon free uname -a df -T

צריכת CPU ודיסק גבוהה לאחר שחזור מעדכון כושל

תמיכה התקנה

Ed_S (Ed S) 30 במרץ,‏ 2024,‏ 12:38pm 15

That’s good progress! I recommend

# cat /sys/kernel/mm/transparent_hugepage/enabled
always madvise [never]

נושא		תגובות	צפיות
Unusually high CPU usage Self-hosting	31	1512	18 בפברואר,‏ 2026
Discourse not using much RAM Self-hosting server-resources	30	2217	8 באוגוסט,‏ 2021
Discourse installation has been getting slower and slower and slower Self-hosting server-resources	36	2348	15 באפריל,‏ 2023
I keep getting errors when updating Product Support	26	762	16 ביולי,‏ 2025
Discourse Fails to update in the Admin UI - No matter what Self-hosting	31	1164	5 באוגוסט,‏ 2025

צריכת CPU ודיסק גבוהה לאחר שחזור מעדכון כושל

נושאים קשורים