I’ve installed Discourse via Docker on a Ubuntu as mentioned in Set up Discourse in the cloud in under 30 minutes. The site works from localhost (ssh & port forward via putty). I’m trying to see if SSL is the reason I’m unable to access the site outside localhost via Virtual Machine’s Public IP Address or domain name (via ‘A’ records). So, here is what I’m trying to do to enable Let’s Encrypt. cybersathya@Vaaithaaforum:/var/discourse$ sudo ./discourse-setup Ports 80 and 443 are free for use The configuration file containers/app.yml already exists! . . . reconfiguring . . . Saving old file as app.yml.2017-10-13-002911.bak Found 3GB of memory and 1 physical CPU cores setting db_shared_buffers = 768MB setting UNICORN_WORKERS = 2 Hostname for your Discourse? [forum.vaaithaa.com]: forum.vaaithaa.com Email address for admin account(s)? [sathya@vaaithaa.com]: sathya@vaaithaa.com SMTP server address? [smtp.sendgrid.net]: smtp.sendgrid.net SMTP port? [587]: 587 SMTP user name? [apikey]: apikey SMTP password? [stmp password as given by sendgrid] Let’s Encrypt account email? (ENTER to skip) [me@example.com]: sathya@vaaithaa.com Checking your domain name . . . WARNING:: forum.vaaithaa.com does not appear to resolve to 10.0.0.4. LET’S ENCRYPT cannot work if their servers cannot access your host by name. Unless you think you know why this naive check failed, DO NOT USE Let’s Encrypt. (A typical reason for failure is an AWS server with an elastic IP.) You should probably answer “n” at the next prompt and disable Let’s Encrypt. Does this look right? Hostname : forum.vaaithaa.com Email : sathya@vaaithaa.com SMTP address : smtp.sendgrid.net SMTP port : 587 SMTP username : apikey SMTP password : [stmp password as given by sendgrid] Let’s Encrypt : sathya@vaaithaa.com ENTER to continue, ‘n’ to try again, Ctrl+C to exit: n IP Address (with context screenshot): [Screenshot (412)]

Does the site work WITHOUT SSL? I have Discourse on an Azure Ubuntu VM and it worked like a charm with no hassles. First set it up WITHOUT Lets Encrypt. Make sure that you can access the site over straight HTTP. Then modify app.yaml to include Lets Encrypt and rebuild. From your error messages, it looks like you have not opened the EndPoint to the public IP address. That’s why Lets Encrypt is not finding the public IP.

the command ip addr show gives the following: cybersathya@Vaaithaaforum:/var/discourse$ ip addr show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc mq state UP group defa ult qlen 1000 link/ether 00:0d:3a:f2:33:be brd ff:ff:ff:ff:ff:ff inet 10.0.0.4/24 brd 10.0.0.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::20d:3aff:fef2:33be/64 scope link valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state UP gr oup default link/ether 02:42:e2:3c:5b:29 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 scope global docker0 valid_lft forever preferred_lft forever inet6 fe80::42:e2ff:fe3c:5b29/64 scope link valid_lft forever preferred_lft forever 59: vetha06db8f@if58: mtu 1500 qdisc noqueue m aster docker0 state UP group default link/ether 5a:da:8a:f7:b4:37 brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet6 fe80::58da:8aff:fef7:b437/64 scope link valid_lft forever preferred_lft forever

Are you saying that http://your host.com doesn’t work for your hostname?

I’m saying that the discourse site works ONLY from local host (127.0.0.1:8000), when tunneling is done with PuTTy, and not from the Virtual Machine’s IP Address. Infact, I’m not able to figure-out how to run Discourse outside local host.

[תמונה] schungx: it looks like you have not opened the EndPoint to the public IP address. Mind letting me know how to do that? Thanks in advance. That’s where i’m stuck.

Scratch your VM, start a new one, do it vanilla without other configurations. You can add your configuration changes later on and rebuild. And, do yourself a favor, use the fastest CPU VM you can afford during setup. It should only be a few days, but it saves you heaps of time waiting for a rebuild (which can take up to 15 min). And do not go below 2GB of RAM, thus do not use things like A0.

[תמונה] schungx: it looks like you have not opened the EndPoint to the public IP address. That’s why Lets Encrypt is not finding the public IP. I was able to find inbound port rules in Azure Settings, and I enabled TCP/443 and TCP/80. Thanks a lot.

I’m able to reach the site via domain name now, after port forwarding 443 & 80. How do we go with SSL now? rerunning discourse-setup is getting this error. Checking your domain name . . . WARNING:: forum.vaaithaa.com does not appear to resolve to 10.0.0.4. LET’S ENCRYPT cannot work if their servers cannot access your host by name. Unless you think you know why this naive check failed, DO NOT USE Let’s Encrypt. (A typical reason for failure is an AWS server with an elastic IP.) You should probably answer “n” at the next prompt and disable Let’s Encrypt.

How do you have an ANAME when you’re using a dynamic public IP? You should be using a static public IP for that, right?

[תמונה] CyberSathya: Unless you think you know why this naive check failed, DO NOT USE Let’s Encrypt. (A typical reason for failure is an AWS server with an elastic IP.) You’ve demonstrated that you know that the address used to access your host is not 10.0.0.4, so it would seem that you know why this naive check failed. Still, this remains confusing to people and the set of people who are confused by this naive check is growing, especially with people increasingly using Azure. I’ll try to either make the check more robust or tone down the language to make it less scary sometime soon.

Let's Encrypt: בעיית שם מארח ב-Azure

תמיכה התקנה

CyberSathya (Sathya Narayanan Subramanian) 13 באוקטובר,‏ 2017,‏ 3:26pm 12

I sincerely look forward for a tone-down. Thanks for sharing your knowledge via this community.

נושא		תגובות	צפיות
Getting error when setting up Let's Encrypt SSL on GCP Self-hosting	10	1645	22 באוקטובר,‏ 2019
Letsencyrpt setup fails for host with internal IP address Self-hosting	1	2536	14 בדצמבר,‏ 2019
Can't access site after Let's Encrypt install Self-hosting	17	695	7 בספטמבר,‏ 2022
Discourse installation on Azure not reachable Self-hosting	10	4675	17 באוגוסט,‏ 2021
Discourse setup on aws ec2 doesn't work with default IPv4 DNS Self-hosting hosting	13	1716	3 בספטמבר,‏ 2021

Let's Encrypt: בעיית שם מארח ב-Azure

נושאים קשורים