이런 동작이 이미 논의되지 않았다는 것이 좀 의외인데, 검색을 해봐도 관련 정보를 찾을 수 없었습니다. 아마 제가 적절한 키워드를 사용하지 못해서 그런 것 같습니다.
이미지가 포함된 Discourse 게시물의 내용을 선택하여 복사한 후 다른 곳에 붙여넣으면, 마크다운 로컬 이미지 형식인 upload://(문자열) 구문이 그대로 유지됩니다. 이로 인해 대상 필드(구글 문서, 다른 포럼 등)에서 이미지가 렌더링되지 않아 매우 번거롭습니다. 특히 이미지가 많을 때는 더 그렇습니다.
예를 들어, 이 게시물의 모든 내용: https://unicyclist.com/t/post-your-broken-uni-parts-here/105464/290?u=canapin을 선택하여(이미지 포함) 메타에 붙여넣으면 다음과 같은 결과가 나옵니다(구문을 볼 수 있도록 코드 블록으로 표시함):
I am surprised nobody broke a part in 3 years (the thread may have been forgotten :wink: ).
Got a surprise 2 weeks ago when I found my muni crippled in the basement:
This pic was taken after I remove all the loose spokes (where the flanges broke) leaving 2 spokes on one side and 12 on the other (it is a 36 spokes hub/rim).
To be fair @MAD4ONE documents clearly that this hub is not meant for extreme use, should be built with Sapim Strong spokes in 4 cross pattern.
I had the wheel built by a pro but the Siamese wheels workshop forgot the 4 cross (or found it overkill?).
It lasted a good 4 years as I am far from being a muni grandmaster :stuck_out_tongue:
I was having some creaking noises for a while and thought it was a spoke tension issue. But the workshop guy checked and everything was good so he told me it might be spokes rubbing at the crossings (never was keen on greasing the spokes at the crossings as he suggested if I really wanted to get rid of the noise).
I am in the slow process of pulling the last spokes and realizing I am missing a few tools (some I never bought like bearings puller and some I have lost like a spoke wrench). But numbers seems to look encouraging for rebuilding with a KH hub I have and these spokes (that’s some silver lining). To be continued in the “lastest build” thread hopefully :crazy_face:
Discourse 포럼에서 복사-붙여넣기를 할 때 마주치는 모든 이미지에 대해 링크를 절대 URL로 수동으로 교체해야 하는 건가요, 아니면 어떤 우회 방법이 있나요?